LITHIUM IRON PHOSPHATE BATTERY — LP16-48100

FEATURES AND BENEFITS

• High life cycle: 6,000 cycles for an effectively reduced total cost of ownership
• Longer lifespan: Low-maintenance batteries with stable chemistry
• Integrated Circuit Protection: The Battery Management System (BMS) is integrated against abuse.
• Better storage: up to 6 months thanks to its extremely low discharge rate (LSD) and no risk of sulfation.
• Recharge quickly: Save time and increase productivity with fewer downtime thanks to superior charging/discharging efficiency.
• Lightweight: Lithium batteries provide more than Wh/Kg while being up to 1/3 of the weight of its SLA equivalent.

Performance may vary by application. All specifications are subject to change without notice to the user. This data is for evaluation purposes only. No guarantee is provided or implied by this data. For clarification and up-to-date information, please contact us.

APPLICATIONS

Iron and lithium phosphate can be used in most applications that use lead-acid, GEL or AGM type batteries. Appropriate applications include:

• Solar storage

• Switch apps and more

• Basic transceiver station

• Communication equipment

• Central Office

• Telecommunication systems

• Electronic cash registers

• Microprocessor-based desktop machine

• UPS

WARNINGS

• DO NOT short-circuit, reverse polarity, crush or disassemble.

• DO NOT heat or incinerate.

• DO NOT immerse in liquid.

• Store at 30~50% SOC. A recharge every 3 months is recommended. The storage area should be clean, fresh, dry and airy.

SYSTEM DIAGRAM

ELECTRICAL PERFORMANCE

• Rated capacity: 100 Ah
• Capacity @ 20A: 300 min
• Energy 5120 Wh • Communication CAN2.0/RS232/RS485
• Resistance ≤45 mΩ @ 50% SOC • Efficiency >96% Parallel Module Up to 3 packs

CHARGING PERFORMANCE

• Recommended charging current 20A
• Maximum charging current 100A
• Recommended charging voltage 57.6 V
• BMS charging cut-off voltage < 58.4 V (3.65 V/cell)
• Reconnection voltage > 57.6 V (3.6 V/cell)
• Balancing voltage < 57.6 V (3.6 V/cell)
• Maximum batteries in the 16 series (*Consult REQUIRED)

DISCHARGE EFFICIENCY

• Maximum DC discharge current 100 A
• Peak discharge current 110 A (3s)
• BMS discharge cut-off current 150 A (300 ms)
• Open voltage balancing 55.2 V (3.45 V/cell)
• Recommended low-voltage disconnection 44 V (2.75 V/cell)
• BMS discharge cut-off voltage > 32.0 V (2 s) (2.0 V/cell)
• Reconnection voltage > 40.0 V (2.5 V/cell)
• Short circuit protection 250~500 s

COMPLIANCE

• CE certifications (battery) UN38.3 (battery) UL1642 & IEC62133 (cells)
• Shipping classification UN 3480, CLASS 9

MECHANICAL PERFORMANCE

• Dimensions (L x W x H) 580 x 400 x 145 mm 22.8 x 15.7 x 5.7″ Approx.
• Weight 20.0 lb (44 kg)
• TERMINAL TYPE DIN POLE
• Terminal torque 80 ~ 100 in-lbs (9 ~ 11 N-m) • SPPC case material
• IP65 case protection

TEMPERATURE PERFORMANCE

• Discharge temperature -4~131ºF
(-20~55ºC) • Charging temperature -4~113ºF (0~45ºC)
• Storage temperature 23~95ºF (-5~35ºC)
• High-temperature cut-off BMS 149ºF (65ºC)
• Reconnection temperature 131ºF (55ºC)

HEATING SHEET PERFORMANCE

• Heating temperature range -4 to 41 ºF (-20 to 5 ºC) • Heating time Approx. 1 hour to 7.5 A

• HEATING SHEET CUT BMS 158 ºF (70 ºC)

DIMENSIONS OF THE PLAN